BS10 Piezoresistive OEM Pressure Sensor

BS10 Piezoresistive OEM Pressure Sensor Features Low cost,compact size,easy installation; TO-5,TO-8 Packaging; Pressure range -100kPa~0kPa~35kPa…700kPa; Gauge, absolute and sealed gauge; Measure non-conductive,non-corrosive gas or liquid. Introduction Bs10 Series Pressure Sensor encapsulates piezoresistive pressure sensor as TO-8,TO-5 metal housing and the standard plastic DIP or ceramic housing.Lower cost,simple package,small size.It can transit the pressure into the voltage signal.Various dimensions for choice.Widely used for pressure measurement of the clean air or gas without corrosion. Application Medical equipment Respirator Barometer Cars Process control Electrical appliances Electrical appliances and leak detection Pressure calibrator Communication system Order note: 1. It is recommended that the sensor should be installed as Suspended Mode to avoid face tight press and avoid affecting sensor stability. 2. Please pay attention to protect the diaphragm to prevent any damage or bad performance. 3. If the working temperature of Viton rubber exceeds the temperature of the rubber specification or be applied in critical environment, please contact us. 4. The material of measuring medium should be compatible with the stainless steel.If it is corrosive,pls specify its material in detail. 5. All specifications are subject to change.Contact Gaohua for specifications and engineering drawings that are critical to your application.Drawings contained in this document are for reference only.